If you Handlebar Jacks need a little boost, then the Handlebar Jack Extenders are what you are looking for.
The Handlebar Jack Extenders increase the clearance height of your jacks by .5 inches.
Based off our testing we recommend only using one pair of extenders with your Jacks. Anything more may compromise the stability of the Jacks. Furious Designs and Handlebar Jack is not responsible for any damage incurred if used in different configurations.
PLEASE NOTE: Jacks not included, can be purchased separately here.
The simple card wallet keeps your ID visible with a window and two pockets for keeping credit cards organized. Get rid of the lump in your back pocket to make sitting more comfortable, reduce back strain, and foil pickpockets. Made of upcycled bicycle inner tubes, it stretches to hold all you can put in it and returns to its original size when emptied.
Features:
Slim design for cards and cash
Clear identification card window
Two main card slots
Materials:
Upcycle Bicycle Inner Tubes
Upcycled Clear Vinyl Window
Dimensions:
2.5 H x 4 W x 0.5 D in.
63.5 x 101.6 x 12.7 mm
Weight:
1 oz
28 g
Built in Colorado
Made in the USA
Designed to be simple and a stylish storage solution. These pouches are made from upcycled bicycled inner tubes to help protect your gear. The mid-size pouch can carry your phone, tools, cash, and any other small belongings. Features: Multi colored interior liners Water resistant exterior Zippered closure Built in the Colorado Made in the USA Limited Lifetime Warranty Materials: Nylon Colored Interior Liners Upcycled Bicycle Inner Tubes Nylon Teeth and Zinc Zipper
Designed to be simple and stylish storage solutions, these pouches are made from upcycled truck inner tubes so your stuff stays protected and dry. The large pouch protects your sunglasses, pens, or small hand tools.
Features:
Water resistant exterior
Zippered closure
Materials:
Upcycled Truck Inner Tubes
Nylon Teeth with Zinc Zipper
Dimensions:
5.5 H x 7 W x 0.75 D in.
139.7 x 177.8 x 19.5 mm
Capacity:
21 cu. in.
340 mL
Weight:
2.5 oz.
71 g
Built in Colorado
Made in the USA
BECOME VISIBLE!SHIOK! retro reflective decals were designed to ensure that you have a safe ride from dusk until dawn. Unleash your creativity and create your own individual design for your bike. There is almost an endless number of combinations. These decals are high-quality and weather-resistant and will not damage the finish of the bicycle or leave any adhesive residues on your bicycle when removing the stickers after use.
1 set can be used for 1 wheel
For wheel sizes 26" - 29"
Designed & made in Germany
IMPORTANT
SHIOK! retro reflective decals will increase your visibility, but not a substitute for safety lights.
Do not stick on the braking area of the wheel!
MOUNTING
Clean the area where you want to place the stickers. The surface must be free of grease and soot. The bike has to be completely clean and dry before the film is applied.
Optimal bonding results of SHIOK! rim stickers is achieved when the bicycle surface is at a temperature between + 21° and + 23 ° Celsius.
Attach the sticker strip to the rim using your thumb and fingernail or a suitable precision instrument.
DIMENSIONS
21 x 21 cm
Stripes 7mm height
Gross weight 42g
COMPOSITION
pvc film
polyacrylate adhesive
pe-coated silicone paper
PRODUCT DESCRIPTIONORALITE® film is a tough weather and solvent resistance product which boasts high flexibility combined with excellent corrosion resistance. The material is plotter cuttable and is especially developed for high-quality commercial and fleet livery to produce lettering, markings and decorations. The material can be applied to moderately curved surfaces with rivets or corrugated substrates, due to its special cast PVC construction. ORALITE® film is composed of catadioptric glass beads which are embedded in a transparent layer of plastic material.RETROREFLECTIVITYORALITE® film meets the performance requirements of ECE 104 class D and is available as 5600D product with watermark. Values of retroreflection are complied with when measured in accordance with the corresponding specifications using CIE standard illuminant A, and the provisions of CIE No.54.2.ADHESIVEThe adhesive consists of a solvent polyacrylate, permanent pressure sensitive adhesive. The release paper (145g/m²) has a PE coating applied to silicone-coated paper on either side. As the product and batch number are applied to the silicone-coated paper, all production parameters and raw materials can be completely traced.DANGEROUS CONTENTSDo not contain hazardous substances neither substances of the "Candidate List of Substances of Very High Concern for Authorisation" ECHA (REACH) concetration >0,1 % (w/w) (Relating: film + adhesive)
The Zeroflats CO2 inflator is a handy tool to use with 16gm cartridges (not included) for inflating bike tires. The lightweight product weights only 8 grams and fits into a pocket and can be carried around easily. Measures just 3cm x 2.5cm.
OVERVIEW
ZEROFLATS is an anti-puncture sealant that works faster than any other brand.
ZEROFLATS uses a liquid with nanocapsulated latex that has the ability to move faster than slimy or regular liquids. This nanocapsulated latex liquid also remains liquid much longer inside the wheel and does not dry up as quickly. In case of a puncture, ZEROFLATS instantly clots the tire forming a flexible, resistant and permanent latex rubber plug to seal the tire or tube.
ZEROFLATS supplies a broad group of professional Mountain Bike, Enduro, Tour and Giro riders with this liquid. It has been professionally and successfully used for over a decade in a variety of bike races and competitions.
ZEROFLATS is made in Spain from biodegradable and environmentally friendly contents that will keep our planet clean and safe.
ZEROFLATS is a professional grade bicycle tire sealant that works faster and more consistently than regular sealants.
ZEROFLATS works on all kinds of bicycle tires such as:
Clincher / Tubed / Standard tires, Tubular tires and Tubeless tires.
ZEROFLATS works on all kind of valves such as:
Schrader / American valves and Presta / French valves WITH REMOVABLE VALVE CORES
All valves with non-removable cores are messy and require a different ZEROFLATS product.
FEATURES
ULTRA-FAST PUNCTURE SEALANT (PERMANENT!): ZEROFLATS is a special formulation of an ultra-fast moving nanocapsulated latex liquid that flows inside your tire. In the event of a puncture or leak, the sealant will fill up the puncture and clots instantly, forming a resistant and permanent plug. Seals punctures up to 5mm.
PREVENTS FLAT TIRES: With ZEROFLATS in your tires, you won’t have to dismount your bike to repair punctures. ZEROFLATS will do it for you. Since ZEROFLATS works instantly from the moment your tire is punctured, the loss of air in the tire is negligible, preventing flat tires.
CLEANEST PRODUCT IN THE MARKET: ZEROFLATS is a biodegradable solution made from nanocapsules of latex and organic granulate. ZEROFLATS does not contain ammonia. ZEROFLATS is environmentally friendly and easily washes off your tire. So, no mess and super easy to apply. ZEROFLATS does not stain, rinses easily with water, doesn't leave any permanent residue, and leaves the valve clean / unclogged unlike other brands.
BONUS TOOLS INCLUDED: Each ZERO FLATS TUBELESS bottle comes with a blister pack with the following tools so that they can be readily put to use - One 4.5cm fat tube (for Schrader valve), one 4.5cm thin tube (for Presta valve), one A-Type tool (for Presta valve), and one tool (for Schrader valve).
WORKS ON ALL KINDS OF BICYCLE TIRES: Standard, Tubular, or Tubeless tires with removable valve cores. Works on all types of bicycles: Mountain Bike, Hybrid/Comfort Bike, Road Bike, Triathlon/Time Trial Bike, BMX/Trick Bike, Commuting Bike, Cyclocross Bike, Track Bike/Fixed Gear, Folding Bike, Cruiser, Recumbent, Tandem and E-Bikes.
DOSAGE: 180ml for two tires - 29" or 27.5+ or dosage for one tire: FAT or 29". For more information, please look at our picture chart. Other bottle / size options are also available.
HOW TO USE
Remove the valve core from the stem.
Shake bottle before applying the recommended amount through the valve stem.
Return the valve core.
Pump air into the tire and you are set!
SAFETY
ZEROFLATS is only intended for bicycle tires and is not recommended for cars / motorcycles.
It is recommended to check the sealant and replace it after 4-8 months depending on various conditions.
Keep the bottle tightly covered, in a dry and cool place.
Do not expose to freezing temperatures.
OVERVIEW
ZERODUST lubricates and protects your bike chains and parts from water and dust in all weather conditions, prolonging the life of your bike chains and parts.ZERODUST is made of vegetable wax and contains ceramic wax that allows a film to form on the chain, protecting your chain from water and dust, so the chain remains clean and lubricated for longer, reducing lube re-applications.ZERODUST is made in Spain from biodegradable and environmentally friendly contents that will keep our planet clean and safe.ZERODUST is trusted by a broad group of professional Mountain Bike, Enduro, Tour and Giro riders. It has been professionally and successfully used in a variety of bike races and competitions.
ZERODUST works for all kinds of bicycles such as:
Mountain Bike, Hybrid/Comfort Bike, Road Bike, Triathlon/Time Trial Bike, BMX/Trick Bike, Commuting Bike, Cyclocross Bike, Track Bike/Fixed Gear, Folding Bike, Cruiser, Recumbent, Tandem and E-Bikes.
ZERODUST can be applied to important parts of a bicycle such as:
Chain, Derailleur Assemblies, Brake and Derailleur Cables, Brake and Shifter Levers, Brake Assemblies and Pedals.
KEY FEATURES
LUBRICATES & PROTECTS YOUR BIKE CHAIN & PARTS: ZERODUST lubricates and reduces friction on your bike chain and parts resulting in an increase in performance. ZERODUST is made of vegetable wax and contains ceramic wax that allows a film to form on the chain, repelling water and dust to protect your chain, so the chain remains clean and lubricated for longer, reducing lube re-applications.
EASY TO USE & DOES NOT STAIN: ZERODUST is a transparent lubricant that is easy to use and will not soil your hands or clothing. It also keeps your bicycle parts clean.
NATURAL & ECO-FRIENDLY FORMULA: ZERODUST is made in Spain from biodegradable and environmentally friendly contents that will keep our planet clean and safe.
USED BY PROFESSIONALS: ZERODUST is trusted by a broad group of professional Mountain Bike, Enduro, Tour and Giro riders. It has been professionally and successfully used in a variety of bike races and competitions.
DOSAGE: 120ml can lubricate 4 to 8 bikes. Ideal size to carry in your jersey. Works for all kinds of bicycles and 100% adapted for E-Bikes.
HOW TO USE
Clean the parts thoroughly where you wish to apply the lubricant.
Shake the bottle and apply the lubricant on the parts.
Remove any excess lubricant and you are set!
GREAT TIP: You can apply ZERODUST before you go riding, which is common, but it’s better if you apply ZERODUST after the ride to give it time to set in so that you’re all set for your next ride.
SAFETY
It is recommended to clean your chain with hot water after each outing.
Keep the bottle tightly covered, in a dry and cool place.
Do not expose to freezing temperatures.
OVERVIEW
ALL-TIME FAVORITE.
If you want a mudguard that looks rad and protects your face and suspension fork from dirt, mud and front-wheel spray, schlamm:PE is the mountain bike fender you were looking for! You can use it on your enduro, trail, all Mountain, cross country, freeride, downhill or E-MTB and have fun regardless of the conditions on the trail.
FEATURES
for mountain bikes and E-MTBs of all wheel sizes and tires up to 2.6 inch
3 year warranty against defects in material and manufacturing
made in germany
zip ties included
robust and weatherproof
100% recyclable material
length: 220 mm (8.5 inch)
material: 1.2 mm thick
weight: 33 g
HIGHLIGHTS AND BENEFITS
CLEAR VIEW. Our fender will keep you cleaner, dryer and stop your goggles or glasses getting covered in filth, so you can enjoy the ride regardless of the conditions on the trail.
AWARD WINNING. Made in Germany and awarded by the press: Our mudguards are guaranteed to be a solid choice.
3 YEAR WARRANTY. We offer high quality and 3 years of warranty against defects in material and manufacturing – just to make sure you´re happy.
READY IN 2 MINUTES. schlamm:PE is mounted to your suspension fork with the included zip ties in no time. So you can get out and ride!
REAR SHOCK PROTECTION. Depending on the design of your bike´s rear triangle and your tires, schlamm:PE can also be mounted to protect the rear shock. If you are not sure, if it works on your bike, just ask us!
TECH
LIFESTYLE
VIDEOS
Highlights
This adapter gives even more choice on where to fit your Loop Mount.
It can be removed quickly to take it off when not needed, or switch between bikes.
It also enables it to be fitted easily onto stems, square bars or other unusual setups.
This adapter is designed for larger bars and can feel loose on slimline 22.2mm 7/8” bars.
Make sure to pair the Removable Adapter with your Loop Mount. (Loop Mount is sold separately).
Inclusions
Elastomer Band x1
Oversize Shim x1
Hook x1
Screws for Loop (2021+) x2
Screws for Loop (2020) x2
OVERVIEW
MUDDER MINI is designed for gravel riders and mountain bikers to protect their face and headset bearings from dirt sprays and mud splashes. The MUDDER MINI attaches with innovative adjustable anti-slip straps to guarantee an instant and perfect fit on all fork sizes.
Technical data: Measures: 90 x170 mm (effective) (3.54 inches x 6.69 inches) Weight: 21 g (0.05 lb) Material: 0.8 mm PP (Polypropylene)
FEATURES
PROTECT FACE AND HEADSET BEARINGS: The Ass Savers MUDDER MINI is a quick fender to protect your face and headset bearings from dirt and spray during high speed trail rides. MUDDER MINI will not protect riders from general sprays from front tire.
FITS ALL CROSS/GRAVEL FORKS: The MUDDER MINI will fit all gravel/cx forks with clearance for tire widths between 32 mm up to 55 mm. It will not work on a road fork with narrow clearance or for fat bikes. The correct position is about 10 mm above the tire. Aligning the position to the tire and not the fork crown increases efficiency and is made possible by our custom hook and loop straps. Make sure that the mudguard doesn't touch your down tube when turning the handlebar.
EASY MOUNTING WITH INNOVATIVE STRAPS: The specially designed straps have enough friction to prevent the mudguard from sliding down on a conic fork leg. However, it needs to be tighten firmly to stay up. The open ended design of the strap will allow you to adjust the length and thereby center the position of the ASS SAVERS logo on the fork leg. You can also inverse the strap if you prefer to have a no-logo appearance.
PRE-FOLDING DESIGN: The secret to transforming a flat piece of plastic into a functioning product lies in the pre-folding prior to use. All the scoring lines have been carefully engineered to achieve locking mechanisms, self centering abilities, spring loading and material endurance. Please take the time to properly read the instructions to ensure the best performance.
LIGHTWEIGHT: Weighing only 21 grams (0.05 lb), MUDDER MINI is extremely lightweight, so you won't even feel it is there.
GALLERY
VIDEOS
OVERVIEW
FAST. FASTER. STYLISH.
Your bike should not only be fast, but also look stylish? Then this race insert is recommended.
FEATURES
for cyclocross and gravel bikes of all wheel sizes up to 28 inches
3 years warranty on material and workmanship defects
Made in Germany
cable ties included
robust and weatherproof
100% recyclable material
length: 200 mm
material thickness: 0.8 mm
weight: 17 g
HIGHLIGHTS AND BENEFITS
DURABLE AND EXTRA THICK MATERIAL. The graphics are embedded in the material and permanently protected from adverse influences, also making it extremely scratch resistant. Material used is Extra thick for maximum stiffness and durability, made of recyclable Polypropylene (PP).CLEAR VIEW. Our fender will keep you cleaner, dryer and stop your goggles or glasses getting covered in filth, so you can enjoy the ride regardless of the conditions on the trail.
AWARD WINNING. Made in Germany and awarded by the press: Our mudguards are guaranteed to be a solid choice.
3 YEAR WARRANTY. We offer high quality and 3 years of warranty against defects in material and manufacturing – just to make sure you´re happy.
READY IN 2 MINUTES. CRISS:CROSS is mounted to your suspension fork with the included zip ties in no time. So you can get out and ride!
TECH
LIFESTYLE
Handle bar mount for ATS/STS bike computers incl. mounting material o-rings (32mm and 42mm)
Compatible with the following bike computers: BC 7.16 ATS, BC 9.16 ATS, BC 14.16 STS/CAD, BC 16.16 STS/CAD
OVERVIEW
Free from Dirt, Mud, and Water! The rit:ze L of rie:sel design is the wider version of the mudguard rit:ze. This keeps your back and buttocks free of dirt, mud and water on the trail or on the road. Specially developed and optimized to the requirements of modern racks on saddles
Assembled in Minutes. Tool-free on the saddle between the saddle stays.
Stay Dry. Reduce back spray in wet roads. Robust and weather resistant.
Excellence. 100% recyclable material, Made in Germany and recognized by the press
3 year warranty on material and workmanship.
Length: 345 mm; Material Thickness: 1.2 mm;WEIGHT: 36 g
Note: The splash guard does not fit saddles from SQlab with active technology due to the system.
TECH
LIFESTYLE
VIDEOS
OVERVIEW
Introducing the Brompton Adapter - A Must-Have Addition for Loop Mount Users!
Are you the owner of a Brompton folding bicycle? Then our Brompton Adapter is the perfect solution for you. Designed specifically for Loop Mount, this adapter allows for seamless fitting with Brompton M/H-type bars, even in limited space.
Brompton bicycles are a top choice for commuters, especially those navigating urban landscapes with limited storage space. With our Brompton Adapter, you can now effortlessly mount your phone and navigate the roads ahead with ease.
The Adapter and Mount do not interfere with the folding of the bars and Brompton Bicycle.
Make sure to pair the Brompton Adapter with your Loop Mount for optimal performance. Upgrade your cycling experience today!
Please note: The Brompton Adapter is not compatible with the T-line Model, unless using straight bars, in which case normal fitting without the adapter is possible.
HIGHLIGHTS
FOR BROMPTON'S, BY POPULAR DEMAND: Loop Mount has been very popular with Brompton riders. The adapter sits in the middle of the bars and with its high quality finish, it simply feels like part of the bike.
FOR ALMOST ANY BROMPTON SETUP: This adapter allows for the mount to be fitted to setups with M/H or P style Brompton handlebars. For people with S-type bars, there is the option to fit Loop Mount in the traditional way.
SECURELY HOLDING YOUR PHONE: It’s not just your Brompton that is important, your phone is too. The adapter still allows for Loops 3kg of grip force, holding the phone nice and tight.
BUILT TO LAST: Our phone mounts are all metal CNC construction built to be durable for all weather conditions.
ACCESSORIES FOR ALL SET-UPS: We have also designed some accessories to make the mounts work for all. These makes the mounts removable, quarter turn compatible, able to be mounted on on stem or handlebars.
INCLUSIONS
Brompton Adapter - x1 (Loop Mount Sold Separately)
O-Rings - x2
Fitting Bolts Large - x2
Fitting Bolts Small - x2 (for first edition non-twisting Loop Mounts)
The Wide Ankle Strap is made from upcycled bicycle inner tubes. Keep your pants clean, strap together your skis, roll up your yoga mat, or use it to secure gear to your pack. This incredible strap has a multitude of uses.
Features:
Fully adjustable hook & loop closure
Reflective strip for nighttime visibility
Materials:
Upcycled Bicycle Inner Tubes
Hook & Loop
Dimensions:
2 H x 16 W x 0.25 D in. (50.8 x 406.4 x 6.35 mm)
406 x 25 x 6 mm
Weight:
1.6 oz. (45 g)
Built in the USA
Description
Each Zipper Pouch is a unique, one-of-a-kind piece. Warm pouches will have either red, orange, and/or yellow as their predominant colors. Cool pouches will have either blue and/or green as their dominant colors.
Designed to be a simple and stylish storage solution, this pouch is made from upcycled banners so your stuff stays protected and dry. It's a great wallet alternative, cell phone case, spare change container, or tool/flat repair kit.
Features:Multi colored interior linersWater resistant exteriorZippered closureBuilt in ColoradoMade in the USALimited Lifetime WarrantyMaterials:Upcycled Bicycle Inner TubesNylon Colored Interior LinersNylon Teeth with Zinc Zipper
Specifications
SMALLDimensions3 H x 5.5 W x 0.75 D in.63.5 x 139.7 x 19.5 mm
Capacity:9 cu. in.147 mL
Weight:1.1 oz.31 g
MEDIUM
Dimensions:6.5 L x 4 H 0.75 D in.165.1 x 101.6 x 19.5 mm
Weight:2 oz.56.7 g
LARGEDimensions:5.5 H x 7 W x 0.75 D in.139.7 x 177.8 x 19.5 mm
Capacity:21 cu. in.340 mL
Weight:2.5 oz.71 g
Keep the dirt off your gear and on the trail with the NEW Villain Vandal. These mudguards are so versatile they can be used on both the front fork and rear triangle. They also come with an extender and zip ties to complete the kit...so shred hard and stay fresh with the Villain Vandal.
Designed to be simple and a stylish storage solution. These pouches are made from upcycled bicycled inner tubes to help protect your gear. The mid-size pouch can carry your phone, tools, cash, and any other small belongings.
Features:
Water resistant exterior
Zippered closure
Materials:
Upcycled Bicycle Inner Tubes
Nylon Teeth and Zinc Zipper
Dimensions:
6.5 L x 4 H 0.75 D in.
165.1 x 101.6 x 19.5 mm
Weight:
2 oz.
56.7 g
Built in the Colorado
Made in the USA
Low Carbon, Eco Friendly Bike Cleaner...
OVERVIEW
Green Oil Green Clean is a deep cleansing agent that will clean your bike by removing the build-up of oil, grease, mud, and grime. Urban riders, as well as mountain bikers, can enjoy the smoother and faster gear transitions and efficient rides. The bottle comes with an easy to remove the leak-proof cap and dual-mode spray for ease of use. The concentrated formula uses less water, to reduce shipping weight and associated carbon footprint.Green Clean offers excellent grease-busting properties, for deep cleaning of bikes for enhanced efficiency. Though made without PTFE or PFOA, the formula offers excellent performance close to the petrochemical equivalent cleansers in the market. The natural formula works through tough muddy frames and oily drivetrains without any side effects of corrosion or other damage to your bike.Green Clean is a pocket-friendly option as 300 ml concentrate can be diluted with water to make 1 liter of cleaning solution. The powerful formula can be applied to the bike and left for a couple of minutes so it can work on the removal of grease and other build-ups. Scrub using a cloth or sponge, and a brush to remove the dirt and grime. Wash off with water.Green Oil's eco-friendly formula made completely with natural plant-based formula, free of palm oil and harmful petrochemicals, gentle on your surroundings by reducing pollution. With its 100% sustainable formula, Green Clean does not leave harmful traces in the environment. The advanced formula is also free of harmful aerosol agents.Use: Pollution-free cleaning of bikes
Recommended for: Commuters or mountain bikers, e-bikes and kids' bikes
Packaging: 300 ml recycled bottle
USAGE TIPS
How to use Green Clean?
1. Shake the bottle to activate ingredients2. Twist spray nozzle to select either spray or water pistol mode3. Spray all over your dirty bike4. Leave for around 2 minutes5. Use a wet Ecosponge and Bicycle Brush to clean off dirt and grime6. Thoroughly rinse your bike with preferably rain water from a butt, or tap water7. Admire your clean bike!
VIDEOS
GREEN FACTS
How is Green Clean green?
Well firstly, its not just the name! The Green Clean formula is totally biodegradable, but not only that, its formula uses 100% natural ingredients. That means a minimal impact on the environment, and lower carbon footprint. Green Clean was developed in house and has award winning cleaning performance. It uses a special detergent derived from coconut oil, and orange peel extract among other natural ingredients. Curiously, the orange peel is a bi-product of the organic orange juice industry. All ingredients are sustainably sourced too.
Refilling Green Clean bottles can be refilled. This reduces the carbon footprint of transporting the products around.
Designed to be simple and stylish storage solutions, this pouch is made from upcycled bicycle inner tubes so your stuff stays protected and dry. It's a great wallet alternative, cell phone case, spare change container, or tool/flat repair kit.Features:Multi colored interior linersWater resistant exteriorZippered closureBuilt in ColoradoMade in the USALimited Lifetime WarrantyMaterials:Upcycled Bicycle Inner TubesNylon Colored Interior LinersNylon Teeth with Zinc ZipperDimensions:3 H x 5.5 W x 0.75 D in.63.5 x 139.7 x 19.5 mmCapacity9 cu. in.147 mLWeight1.1 oz.31 g
Magnet for the speed measurement for STS, ATS and Ant +
Compatible with the following bike computers: Rox 11, BC 7.16 ATS, BC 9.16 ATS, BC 14.16 STS/CAD, BC 16.16 STS/CAD, BC 23.16, Pure 1 ATS, BC 8.12 ATS, BC 12.12 STS, BC 14.12 STS Alti
OVERVIEW
Ass Savers MUDDER is designed for use by bikers to protect their face from dirt sprays and mud splashes during high speed trail rides. The MUDDER attaches with zip ties to guarantee an instant and perfect fit on all fork sizes.
Measures: 237x154 mm (9.33 inches x 6.06 inches)Weight: 18 g (0.04 lb)Material: 0.8 mm PP (Polypropylene)
FEATURES
FACE PROTECTION FROM DIRT SPRAYS: The Ass Savers MUDDER is a quick fender to keep your eyes free of dirt and spray during high speed trail rides. Mudder will not protect riders from general sprays from front tire.
FITS ALL SUSPENSION FORKS WITH A FORK BRIDGE: Ass Savers MUDDER fits all standard front suspension forks with wheel sizes between 26" to 29". If you have a fork with an inverted fork bridge, like DT Swiss or Magura, then it won't fit without modifications.
EASY MOUNTING, PRE-FOLDING DESIGN: MUDDER attaches to the front fork by zip ties. It is for those folks who just don't want to rock a fender permanently, but need one quickly when surprised by a rain. Well engineered design helps with transformation from the flat form to a functional mudguard using a pre-folding process.
INNOVATIVE TIRE HUGGING DEFLECTORS: MUDDER's front flaps can be folded down towards the tire for better protection and improved efficiency.
LIGHTWEIGHT: Weighing only 18 grams (0.04 lbs), MUDDER is extremely lightweight, so you won't even feel it is there.
Note: Zip ties not included
GALLERY
VIDEOS
