MILES RACING - WE SLOW DOWN YOUR JOURNEY
OVERVIEW
CONSISTENT BRAKING: Enjoy ultimate braking stability while conquering aggressive trails. You can always rely on a consistent feeling of safe and comfortable braking, irrespective of whether you are biking on wet, muddy trails or dry, desert sands. This unparalleled consistency sets sintered pads a level above semi-metallic counterparts where braking performance can vary significantly from brand to brand.
HIGH-TEMPERATURE RESISTANCE: Extremely rugged, sintered construction prevents high-temperature build-up from constant slamming of brakes. This ensures resistance to temperatures as high as 850° - 900°, a far cry from semi-metallic counterparts.
RACE APPROVED: Sintered brake pads are specifically built to withstand the grind of continuous braking in race tracks. Heavy-duty braking power is perfect for extreme racing or downhill racing.
LONG LASTING: Miles Racing premium pads offer unfailing braking power that adventure riders can count on. The iron and copper fortified pads have the highest metallic content among peers. This unique hard compound construction significantly slows down the wear and makes the pads last longer even under extreme riding conditions.
RELIABILITY & COMPATIBILITY: Experience highly reliable, fade-free braking performance on road bikes, touring bicycles, e-bikes, e-MTB cycles, and mountain bikes. Non-asbestos construction further ensures biking safety. Made in Germany and tested by independent testing companies. Check the list of compatible brake systems for a complete list of compatible brakes.
COMPATIBLE BRAKESThis brake pad is compatible with following systems. If you are looking for a different model, please refer to our compatibility chart for all models.
MAGURAMagura MT7
USAGE TIPS
To get the most braking power out of your new sintered pads, it is important to follow these steps to break them in properly.
Brake for 5 seconds while riding at a speed of about 7 mph. Repeat this process 3 more times.
Brake from about 20 mph with medium power and release before coming to a complete stop. Repeat this process 40 times. You should feel the brake performance increase. Let the pads cool between each stop.
Done - Ready for action!
MILES RACING - WE SLOW DOWN YOUR JOURNEY
OVERVIEW
CONSISTENT BRAKING: Enjoy ultimate braking stability while conquering aggressive trails. You can always rely on a consistent feeling of safe and comfortable braking, irrespective of whether you are biking on wet, muddy trails or dry, desert sands. This unparalleled consistency sets sintered pads a level above semi-metallic counterparts where braking performance can vary significantly from brand to brand.
HIGH-TEMPERATURE RESISTANCE: Extremely rugged, sintered construction prevents high-temperature build-up from constant slamming of brakes. This ensures resistance to temperatures as high as 850° - 900°, a far cry from semi-metallic counterparts.
RACE APPROVED: Sintered brake pads are specifically built to withstand the grind of continuous braking in race tracks. Heavy-duty braking power is perfect for extreme racing or downhill racing.
LONG LASTING: Miles Racing premium pads offer unfailing braking power that adventure riders can count on. The iron and copper fortified pads have the highest metallic content among peers. This unique hard compound construction significantly slows down the wear and makes the pads last longer even under extreme riding conditions.
RELIABILITY & COMPATIBILITY: Experience highly reliable, fade-free braking performance on road bikes, touring bicycles, e-bikes, e-MTB cycles, and mountain bikes. Non-asbestos construction further ensures biking safety. Made in Germany and tested by independent testing companies. Check the list of compatible brake systems for a complete list of compatible brakes.
COMPATIBLE BRAKESThis brake pad is compatible with following systems. If you are looking for a different model, please refer to our compatibility chart for all models.
MAGURAMagura MT5Magura MT7Magura MT Trail
USAGE TIPS
To get the most braking power out of your new sintered pads, it is important to follow these steps to break them in properly.
Brake for 5 seconds while riding at a speed of about 7 mph. Repeat this process 3 more times.
Brake from about 20 mph with medium power and release before coming to a complete stop. Repeat this process 40 times. You should feel the brake performance increase. Let the pads cool between each stop.
Done - Ready for action!
The quality of this shirt is one of the best available. This 100% preshrunk ringspun cotton t-shirt is one of those super soft boutique type t-shirts you always wear as your favorite one. The shirt wears smoothly and softly, lasts a long time, and doesn't shrink when washed or stuck in the dryer (wash and dry gently). The shirt was made in Nicagarua and designed in California. No tags allowed inside to avoid itch or discomfort.
Here is a value pack that you might like with a T-Shirt, Ass Savers Mudguard and Cycling cap - all in Chicago theme.
Overview
The ergotec Reno bicycle grip is a high-quality grip designed for use in the city and for trekking. With its ergonomic shape and hand rest, it offers a comfortable riding experience and supports a relaxed hand position during longer rides. The ""Reno"" grip is available in different versions: "long/long", "long/short" and "short/short".
The black colour of the grip gives it a timeless and elegant look that matches any style of bicycle. The wave-like surface/structure on the grip provides additional grip and improved grip strength. The grip is screw clamped, ensuring a stable and secure attachment."
Lightweight. With a weight of approx. 198 g, the ergotec Reno grip is light and hardly adds to the overall weight of the bike. This makes it an excellent choice for riders who value light weight and optimal balance.
High Quality Material. Made of high-quality Kraton material and with a gel insert, the grip offers a pleasant feel and effective damping of vibrations and shocks. This noticeably improves the riding experience, especially on uneven roads or bumpy paths.
Ergonomic Design. The range of ergotec grips combines ergonomics with dynamic design. It includes grip models that vary in size such as long/long and long/short sizes, to cover the complete spectrum for everyday, leisure and sports use. A number of innovative features ensure cycling fun, comfort and ultimately a more relaxed ride, even on longer trips, whether for conventional or e-bikes.
Power and Safety. ergotec has an extensive and well-coordinated product range for all 3 contact points in the area of handlebars/grips, saddles/seatposts and pedals. This allows the bicycle to be optimally adapted to the individual needs of the cyclist, and reduces discomfort when cycling. In addition, long distances can be covered with power and safety.
Made in Germany. All the materials of the new ergotec EG grips are manufactured in Germany under the highest quality standards in an environmentally friendly and sustainable manner.
Specifications
Grip diameter - 22.2 mm
Length left - 92 mm + 43 mm
Length right - 92 mm + 43 mm
Weight - 198 g
Finish - Black
Bar ends - mountable
Clamp - yes
Handlebar plug - yes
Material - Kraton/Gel
Assembly
The quality of this shirt is one of the best available.
This 100% preshrunk ringspun cotton t-shirt is one of those super soft boutique type t-shirts you always wear as your favorite one.
The shirt wears smoothly and softly, lasts a long time, and doesn't shrink when washed or stuck in the dryer (wash and dry gently).
The shirt was made in Nicagarua and designed in California.
No tags allowed inside to avoid itch or discomfort.
Overview
ZEITBIKE brings you the world's lightest and long lasting bicycle tire inner tubes by Eclipse. These tubes are perfect for cyclists who want the best of both worlds - a super lightweight tube that's stronger and long lasting.
The tube is made from premium TPU material, with a 40mm valve length and metal valve stem. The removable valve core means you can easily change out the valve if needed or use valve extenders to fit your rim height. Plus, the small package size makes it easy to take with you on the go.
Size Choices:
Size: Road 20/25mm Tire Sizes: 622 x 20-25mm/700 x 20-25C Weight: 35gm/0.077lb (40mm valve) Valve: 40mm OR 70mm with 30mm valve extenderPatch Kit: Up to 4 pc patch kitsPack size: Single or 2 pack
Size: Road 28/35mm Tire Sizes: 622 x 28-35 mm/700 x 28/35C Weight: 44gm/0.097lb (40mm valve)Valve: 40mm OR 70mm with 30mm valve extenderPatch Kit: Up to 4 pc patch kitsPack size: Single or 2 pack
Size: Road/Gravel 30/45mm Tire Sizes: 622 x 30-45 mm/700 x 30/45C Weight: 60gm/0.13lb (40mm valve)Valve: 40mm OR 70mm with 30mm valve extenderPatch Kit: Up to 4 pc patch kitsPack size: Single or 2 pack
Features
ULTRA LIGHTWEIGHT BICYCLE TUBE: These inner tubes by Swiss company, Eclipse claim to be the lightest tubes weighting in the range of 35g/44g/60g (40mm valve) for the 3 size choices available for road/gravel/mtb bikes. They are lighter than tubeless setup, offering lower rolling resistance and better flat protection.
PREMIUM TPU: Tubes are welded using thermoplastic polyurethene (TPU), unlike standard bonded tubes, giving them an upper hand in terms of durability and longevity. 100% Recycleable.
LONG LASTING W/ PUNCTURE PROTECTION: These inner tubes offer greater puncture protection, also easily repaired with a special kit (NOT INCLUDED). Though lighter than standard tubes, these tubes are made with special material to make them stronger and long lasting for your rides.
SIZE CHOICES: Available in 3 sizes - Road 20/25mm, Road 28/35mm, or Road/Gravel 30/45mm. with 40mm valve, that can be up to 70mm with 30mm valve extender available as an optional addon. Compatible tire sizes are 622 x 20-25mm/700 x 20-25C, 622 x 28-35 mm/700 x 28/35C, or 622 x 30-45 mm/700 x 30/45C for the 3 sizes respectively.
REMOVABLE VALVE CORE: Tubes feature a metal valve stem and removable valve core. Valve length goes upto 70mm with valve extender.
OVERVIEW
The Win Wing Gravel fits practically any gravel bike, protecting the rider in even the worst conditions. No matter the terrain, on-road or off, the Win Wing won't rattle or jam, and with only 72g / 0.16lb, you won't even notice it's there. Based on the principal of tangential Coverage, the Wing Wing catches the spray by shielding the upper rear quarter of the wheel, protecting your critical areas (thighs, butt and back) and drastically increasing your comfort. And when comfort can be had without a weight penalty, that’s what we like to call a “win-wing situation”.
Full backside rider protection from the knee and upPatent pending Wishbone attachment systemAttaches in seconds to every bike, requires no toolsUltra-lightweight at 72 grams / 0.16 lbSuitable for tire widths up to 60 mm / 2.36 in
Measures: 375 x 85 mm, 14.76x3.34 inWeight: 72 g, 0.16 lbMaterial: Blade - 0.9 mm PP (Polypropylene),Wishbone holder - glassfiber reinforced PA (Polyamid or Nylon) and Strap - TPU (thermoplastic polyurethane).
FEATURES
MAXIMUM PROTECTION WITH MINIMUM WEIGHT: Win Wing has been designed optimally to shield only the upper rear quarter of the wheel, thereby preventing sprays from reaching the critical areas of the rider. This design minimizes the amount of material used for construction, and thereby keeping the weight minimal so that riders won't even notice. In order for optimal coverage, the mudguard has to be installed quite close to the wheel, with a target of 5-10 mm tire clearance for maximum coverage.
SECURE MOUNTING: Choose from one of the three possible settings to match with the angle of your seat stays. Choose the one that will allow a horizontal or a tail-up position. Avoid a tail-down angle as this will reduce the efficiency of the fender. The straps are made from ultra-tough TPU and should be pulled as tight as you can comfortably do by hand. If you experience that the mudguard is not stable, try to use the next hole in the strap. Review videos and instructions for best performance.
ANTI JAM, ANTI THEFT DESIGN: As sturdy as it is, the design of the Win-wing allows it to flex in case of an accident and it's constructed to not jam in case of large chunks of nature get stuck to your wheel. If you like to keep it attached to your bike permanently, the Win-Wing can be secured to your bike with a standard zip tie, through a designated slot, making it easier to resist for people with sticky fingers.DURABILITY: Win Wing has beend designed with emphasis on sophisticated simplicity and careful choice of materials, making it virtually indestructible. With only four components (competitors use as much as 40 components) it's not that much that can go wrong. The glassfiber reinforced wishbone holder is both flexible and tough and the rubber straps are virtually indestructible. Well engineered design helps with transformation from the flat form to a functional mudguard using a pre-folding process.
SUSTAINABLE: The black blade is made from 80% recycled PP and the Win Wing has been designed for efficient shipping and easy recycling. Each component can be purchased separately, making repairing and upgrading convenient. The Win-Wing is 100% Made in Sweden in ISO 14001 certified factories.
VIDEOS
OVERVIEW
ZERO MARINE is an anti-puncture sealant that works instantaneously to seal air leaks and prevent air loss in paddle surf boards, inflatable boats, and other marine inflatables.
ZERO MARINE uses a liquid made with natural latex, which degrades naturally over course of time without leaving any residue.The liquid is inserted into the board following the attached instructions. It remains inside the board and will be active for 2-3 months but this depends very much on the time the board is exposed to the sun.
KEY FEATURES
PREVENTS MICRO-POROSITY IN PADDLE SURF BOARDS: Zero Marine is designed to provide protection to paddle surf boards and other marine inflatables against micro-porosity caused by natural elements during inflating, launching, or from sand, and rocks.
PROTECTS AGAINST LEAKS AND AIR LOSS: Zero Marine liquid is a sealant to instantaneously seal air leaks so that the board does not lose air and hence retains its volume.
IDEAL FOR PADDLE SURF RENTALS: By using Zero Marine, you can extend life of your marine inflatables, thereby generating more value from them.
WORKS FOR ALL MARINE INFLATABLES: Not just designed for Paddle Surf Boards, the product also works for inflatable boats like Zodiac, as well as other marine inflatables.
NATURAL LATEX BASED: ZEROFLATS is made of natural latex. The product degrades naturally without leaving any permanent residue.
SHELF LIFE: Up to 2 years
HOW TO USE
Watch Video
How To Use Instructions (Download)
Deflate the board
Shake the bottle
Unscrew inflation valve and remove
Move the filter to one side to leave space to insert the tube of Zero Marine bottle
Inject Zero Marine into the inflatable
Replace the inflation valve
Inflate the board
Flip the board over to evenly distribute the liquid
SAFETY
Store at room temperature
Keep away from direct sunlight
Protect your eyes while using Zero Marine
Overview
The ergotec pedal 608 consist of aluminum and is equipped with a rubber-coated outer tread to ensure non-slip grip even in wet weather conditions. With dimensions of 108x69 mm, it offers both comfort and efficiency. The pedal features a sturdy 7mm steel axle and is equipped with high quality ball bearings to ensure a seamless riding experience. Thanks to the ball bearings, pedal resistance is reduced for a smooth, frictionless ride. The ergotec pedal 608 is the ideal choice for demanding cyclists who value quality, comfort and durability - whether on the road, off-road or in the daily commute to work.
Optimal Connection for Rider and the Bike. ergotec has an extensive and well-coordinated product range for all 3 contact points in the area of saddle/seatpost, pedals and handlebars/grips. This allows the bicycle to be optimally adapted to the individual needs of the cyclist, and reduces discomfort when cycling. In addition long distances can be covered with power and safety.
Ergonomics meets design. The perfect combination of design, ergonomics, comfort and efficient power transmission. ergotec EP pedals always ensure a fantastic ride experience. The larger contact zone of the pedals distributes the pressure evenly over the entire surface. Pressure peaks and compression of the nerves are avoided. The curved surface corresponds to the shape of the foot and helps to find the optimum position. All of these has been carefully studied and incorporated in the design.
Sporty and Elegant. On the sporty, most pedals of ergotec have a concave tread surface. The non-slip sandpaper surface offers the foot a secure grip even when wet. High-quality materials and a new bearing technology make ergotec pedals unmistakable highlight.
Ergotec pedals as Medical Product. With the classification and the associated procedure, ergotec provides proof that ergonomic products not only theoretically reduce complaints when cycling, but also practically! Because the benefit is proven and documented in accordance with the law. These medical products exemplify the performance of ergotec Bikeparts.
Various Pedal Types. Zeitbike is also offering different variants of ergotec Pedals which comes in different design and purpose such as usage in urban jungle, city biking, cargo and transport, sporty look, medical products, and many more.
Specifications
Size: 108 x 69
Bearing: Ball Bearing
Reflections: Integrated
Thread: 9/16"
Axle: 7 mm Baron Steel
Material: Alloy/Plastic/Rubber
Finish: Silver/Black
Weight: ~405 g (Pair)
Assembly
OVERVIEW
Ass Savers Win Wing Road fits practically any skinny tire bike, protecting the rider in even the worst conditions. Ideal for winter training or if you want to add some comfort to your puristic urban ride. The Win Wing won't rattle or jam, and with only 64gm / 0.14 lb, you won't even notice it's there.Based on the principal of tangential Coverage, the Wing Wing catches the spray by shielding the upper rear quarter of the wheel, protecting your critical areas (thighs, butt and back) and drastically increasing your comfort. And when comfort can be had without a weight penalty, that’s what we like to call a “win-wing situation”.
Full backside rider protection from the knee and upPatent pending Wishbone attachment system. Attaches in seconds to every bike, requires no toolsUltra-lightweight at 64 grams / 0.14 lb. Suitable for tire widths up to 35 mm / 1.38 in
Measures: 375x85 mm, 14.76x3.34 inWeight: 64 g / 0.14 lbMaterial: Blade - 0.9 mm PP (Polypropylene),Wishbone holder - glassfiber reinforced PA (Polyamid or Nylon) and Strap - TPU (thermoplastic polyurethane).
FEATURES
MAXIMUM PROTECTION WITH MINIMUM WEIGHT: Win Wing has been designed optimally to shield only the upper rear quarter of the wheel, thereby preventing sprays from reaching the critical areas of the rider. This design minimizes the amount of material used for construction, and thereby keeping the weight minimal so that riders won't even notice. In order for optimal coverage, the mudguard has to be installed quite close to the wheel, with a target of 5-10 mm tire clearance for maximum coverage.
SECURE MOUNTING: Choose from one of the three possible settings to match with the angle of your seat stays. Choose the one that will allow a horizontal or a tail-up position. Avoid a tail-down angle as this will reduce the efficiency of the fender. The straps are made from ultra-tough TPU and should be pulled as tight as you can comfortably do by hand. If you experience that the mudguard is not stable, try to use the next hole in the strap. Review videos and instructions for best performance.
ANTI JAM, ANTI THEFT DESIGN: As sturdy as it is, the design of the Win-wing allows it to flex in case of an accident and it's constructed to not jam in case of large chunks of nature get stuck to your wheel. If you like to keep it attached to your bike permanently, the Win-Wing can be secured to your bike with a standard zip tie, through a designated slot, making it easier to resist for people with sticky fingers.DURABILITY: Win Wing has beend designed with emphasis on sophisticated simplicity and careful choice of materials, making it virtually indestructible. With only four components (competitors use as much as 40 components) it's not that much that can go wrong. The glassfiber reinforced wishbone holder is both flexible and tough and the rubber straps are virtually indestructible. Well engineered design helps with transformation from the flat form to a functional mudguard using a pre-folding process.
SUSTAINABLE: The black blade is made from 80% recycled PP and the Win Wing has been designed for efficient shipping and easy recycling. Each component can be purchased separately, making repairing and upgrading convenient. The Win-Wing is 100% Made in Sweden in ISO 14001 certified factories.
VIDEOS
DESCRIPTION
Developed to withstand the year round riding conditions of Florida and endure buckets of sweat and tropical rains, these grips will give you no issues when you’re riding like you stole it. Constructed as a one piece rubber with a slightly tapered design for an ergonomic grip, and a single lock ring for a secure hold onto your bars. The finger side of the grip surface is textured to enhance single finger braking while the palm side gives you that warm fuzzy feeling needed during those OH $#!+ moments!
SPECS
USE: Mountain Bike, Enduro, Trail, XC, Downhill GRIP MATERIAL: Medium Density Rubber LOCK RING MATERIAL: 6061 T6 Aluminum WEIGHT: 145g (grip set w/hardware)OUTER GRIPLength: 134.08 mmClosed End Diameter: 34.36 mmMid Grip Diameter: 32.08 mmPre-Lock Ring Diameter: 32.53 mmLock Ring Diameter: 33.54 mmINNER GRIPCore Diameter: 22.04 mm
TECH IMAGE
COLORS
Brutal Black
Beastly Blue
Gruesome Gray
Greedy Green
Obscene Orange
Revenge Red
Tyrannous Turquoise
Villainous Violet
Malicious Magenta
Yelling Yellow
OVERVIEW
Super Lightweight, UV resistant, and looks absolutely fabulous.
Mounted in Seconds. Simply unscrew the built-in stem cap and tighten your new stem:cap with a maximum torque of 2 Nm. Complete!
Fits any Bike. The top cap can be installed on any stem with a 11/8 inch steerer tube.
Choose from Multiple Designs. Complete your style
Made in Germany. Stem:caps are produced in Germany with resource saving materials and according to high standards. 100% carbon
TECH
LIFESTYLE
VIDEOS
OVERVIEW
The Frankie is the new sausage on the block. It takes its form from the popular Party Frank, but is improved in every key element. A reinforced key, and a reinforced lock housing make the Frankie stronger, sturdier, more reliable and sometimes tastier. Available in attractive color choices.
FEATURES:
Silicone overmoulded braided steel cable with fibre core security
Improved lock body with steel elements
2 strong keys with cool wrist coil
Length 2.3' feet (700mm)
Weight 0.79 pounds (360g)
HIGHLIGHTS
BODY: Patented seamless overmould using industrial grade UV stable silicone. Will not mark or scratch your ride.
LOCK HOUSING: 8mm Stainless steel locking shackle. *No leverage points to ensure extra security against unwanted attacks.
LOCK BARREL: Blade style lock barrel, with 1000 unique combinations.
CABLE DIAMETER: Cable Diameter 13mm, Steel Cable Diameter 6mm plus FIBRE CORE security feature
OVERMOULDED KEYS: 2 color-coded overmoulded, bi-directional cut keys with wrist coil
MATERIALS: Silicone overmoulded braided steel cable with fibre core
TECH IMAGES
Specifications
High impact and rub resistance honeycomb 380 microns semi-rigid PVC.
Minimum weight (20 grams / 0.70 ounces)
Cool look & feel honeycomb material.
Easy to install. Allows repositioning while installing.
Automotive-grade materials. Won't yellow over time. Guaranteed.
9 parts for a universal protection system: 1 big part for the down tube; 5 arrow parts for extending the down tube protection or for the chainstay or for top tube; 3 circles for cable wear protection.
Protect what you love with Style
EASY TO INSTALL. Clean your bike frame thoroughly, then apply rubbing alcohol to the areas where guards will be applied. Line them up and stick them on. It's that simple.
MADE WITH AUTOMATIVE QUALITY MATERIALS. Your bike deserves the best. All Mountain Style has procured the highest quality, high impact material that won't fade or yellow over time.
MILES RACING - WE SLOW DOWN YOUR JOURNEY
OVERVIEW
CONSISTENT BRAKING: Enjoy ultimate braking stability while conquering aggressive trails. You can always rely on a consistent feeling of safe and comfortable braking, irrespective of whether you are biking on wet, muddy trails or dry, desert sands. This unparalleled consistency sets sintered pads a level above semi-metallic counterparts where braking performance can vary significantly from brand to brand.
HIGH-TEMPERATURE RESISTANCE: Extremely rugged, sintered construction prevents high-temperature build-up from constant slamming of brakes. This ensures resistance to temperatures as high as 850° - 900°, a far cry from semi-metallic counterparts.
RACE APPROVED: Sintered brake pads are specifically built to withstand the grind of continuous braking in race tracks. Heavy-duty braking power is perfect for extreme racing or downhill racing.
LONG LASTING: Miles Racing premium pads offer unfailing braking power that adventure riders can count on. The iron and copper fortified pads have the highest metallic content among peers. This unique hard compound construction significantly slows down the wear and makes the pads last longer even under extreme riding conditions.
RELIABILITY & COMPATIBILITY: Experience highly reliable, fade-free braking performance on road bikes, touring bicycles, e-bikes, e-MTB cycles, and mountain bikes. Non-asbestos construction further ensures biking safety. Made in Germany and tested by independent testing companies. Check the list of compatible brake systems for a complete list of compatible brakes.
COMPATIBLE BRAKESThis brake pad is compatible with following systems. If you are looking for a different model, please refer to our compatibility chart for all models.
AVIDAvid DB-1Avid DB-3Avid DB-5Avid Elixir
SRAMSram level TSram Level TL Level Ultimate B1 (from model year 2020)Sram TLM B1 (from model year 2020)Force eTap AXSRed eTap AXS (Gen. 2 - two-part brake caliper)
USAGE TIPS
To get the most braking power out of your new sintered pads, it is important to follow these steps to break them in properly.
Brake for 5 seconds while riding at a speed of about 7 mph. Repeat this process 3 more times.
Brake from about 20 mph with medium power and release before coming to a complete stop. Repeat this process 40 times. You should feel the brake performance increase. Let the pads cool between each stop.
Done - Ready for action!
MILES RACING - WE SLOW DOWN YOUR JOURNEY
OVERVIEW
ENHANCED PERFORMANCE FOR E-BIKES: Miles Racing E-Bike brake pads are specifically designed to handle the extra weight from the battery and motor in E-Bikes. They also are designed with enhanced braking stability at higher speeds that e-bikes are usually used at.
HIGH-TEMPERATURE RESISTANCE: Miles Racing E-Pads are designed with a specific mixture formula that lasts 30% longer than organic brake pad formulas to ensure reliable braking at high temperatures. The higher proportion of synthetic fibers also enhances temperature resistance.
QUIET BRAKING POWER: Miles E-Bike brake pads are optimized with special e-bike surfaces with higher proportion of synthetic para-aramid fibers to reduce wear and tear, yet facilitating quieter operation similar to organic pads.
SUITABLE FOR NON E-BIKE APPLICATIONS: Miles Racing E-Bike brake pads can also be operated on non-electric bicycles as well with no compatibility issues.
RECOMMENDED USES: Miles E-Bike brake pads are designed for touring, trekking, and mountain biking in flat to moderately steep terrain.
QUALITY: Designed in Germany and tested by independent testing companies. Check the list of compatible brake systems for a complete list of compatible brakes.
COMPATIBLE BRAKES
Compatibility chart for E-Bike Brake Pads.
Compatibility chart for All Miles Racing Pads (Sintered, Semi Metallic, Organic, or E-Bike)
MILES RACING - WE SLOW DOWN YOUR JOURNEY
OVERVIEW
CONSISTENT BRAKING: Enjoy ultimate braking stability while conquering aggressive trails. You can always rely on a consistent feeling of safe and comfortable braking, irrespective of whether you are biking on wet, muddy trails or dry, desert sands. This unparalleled consistency sets sintered pads a level above semi-metallic counterparts where braking performance can vary significantly from brand to brand.
HIGH-TEMPERATURE RESISTANCE: Extremely rugged, sintered construction prevents high-temperature build-up from constant slamming of brakes. This ensures resistance to temperatures as high as 850° - 900°, a far cry from semi-metallic counterparts.
RACE APPROVED: Sintered brake pads are specifically built to withstand the grind of continuous braking in race tracks. Heavy-duty braking power is perfect for extreme racing or downhill racing.
LONG LASTING: Miles Racing premium pads offer unfailing braking power that adventure riders can count on. The iron and copper fortified pads have the highest metallic content among peers. This unique hard compound construction significantly slows down the wear and makes the pads last longer even under extreme riding conditions.
RELIABILITY & COMPATIBILITY: Experience highly reliable, fade-free braking performance on road bikes, touring bicycles, e-bikes, e-MTB cycles, and mountain bikes. Non-asbestos construction further ensures biking safety. Made in Germany and tested by independent testing companies. Check the list of compatible brake systems for a complete list of compatible brakes.
COMPATIBLE BRAKESThis brake pad is compatible with following systems. If you are looking for a different model, please refer to our compatibility chart for all models.
MAGURAMagura MT 2Magura MT 4Magura MT 6Magura MT 8
USAGE TIPS
To get the most braking power out of your new sintered pads, it is important to follow these steps to break them in properly.
Brake for 5 seconds while riding at a speed of about 7 mph. Repeat this process 3 more times.
Brake from about 20 mph with medium power and release before coming to a complete stop. Repeat this process 40 times. You should feel the brake performance increase. Let the pads cool between each stop.
Done - Ready for action!
MILES RACING - WE SLOW DOWN YOUR JOURNEY
OVERVIEW
CONSISTENT BRAKING: Enjoy ultimate braking stability while conquering aggressive trails. You can always rely on a consistent feeling of safe and comfortable braking, irrespective of whether you are biking on wet, muddy trails or dry, desert sands. This unparalleled consistency sets sintered pads a level above semi-metallic counterparts where braking performance can vary significantly from brand to brand.
HIGH-TEMPERATURE RESISTANCE: Extremely rugged, sintered construction prevents high-temperature build-up from constant slamming of brakes. This ensures resistance to temperatures as high as 850° - 900°, a far cry from semi-metallic counterparts.
RACE APPROVED: Sintered brake pads are specifically built to withstand the grind of continuous braking in race tracks. Heavy-duty braking power is perfect for extreme racing or downhill racing.
LONG LASTING: Miles Racing premium pads offer unfailing braking power that adventure riders can count on. The iron and copper fortified pads have the highest metallic content among peers. This unique hard compound construction significantly slows down the wear and makes the pads last longer even under extreme riding conditions.
RELIABILITY & COMPATIBILITY: Experience highly reliable, fade-free braking performance on road bikes, touring bicycles, e-bikes, e-MTB cycles, and mountain bikes. Non-asbestos construction further ensures biking safety. Made in Germany and tested by independent testing companies. Check the list of compatible brake systems for a complete list of compatible brakes.
COMPATIBLE BRAKESThis brake pad is compatible with following systems. If you are looking for a different model, please refer to our compatibility chart for all models.
SHIMANODeoreAceraAltusAlivioLXBR-M315BR-M355BR-M365BR-M375BR-M395BR-M415BR-M416BR-M416ABR-M445BR-M446BR-M447BR-M465BR-M475BR-M485BR-M486BR-M495BR-M505BR-M515BR-M525BR-M575BR-M3050BR-M4050BR-MT200BR-MT400BR-MT410BR-MT500BR-T615BR-T675BR-TX805BR-C501BR-C601BENGALBengal Ares ProBengal Ares 5Bengal Helix 7B
CLARKSClark's S2
GIANTRootRoot 2
GUSSETGusset Chute
QUADQHD stingQHD-1.2 Rapide
TEKTROAquila (MD-M500)Aries (MD-M300)MD-M280HD-M282 JuniorHD-M285HD-M286HD-T285MD-C510MD-U510Auriga CompAuriga ProAuriga (HD-M290, HD-M291)Auriga Sub (HD-T520)Auriga Twin (HD-T525)Auriga Tune (HD-T530)HDC 330 (HD-M330)HD-E350 | E-bike brake padsAuriga E-Tune (HD-E530) | E-bike brake padsAuriga E-Twin (HD-E525) | E-bike brake padsAuriga E-Sub (HD-E520) | E-bike brake padsAuriga E-Comp (HD-E500) | E-bike brake padsDorado (HD-E715) | E-bike brake padsDraco 2 (HD-M532)Gemini (HD-M500, HD-M501, HD-M510)Gemini SL (HD-M520, HD-M521)Mira (MD-C400)Mota (HD-C300)Orion (HD-M725, HD-M730)Orion SL (HD-M740)Orion 4Px2P (HD-M735) !!! Rear !!!Vela (HD-T290)Volans (HD-T710)
TRPTRP Dash SportTRP HylexTRP Hyles R5TRP HywireTRP HY / RDTRP paradoxTRP Paradox RTRP Slate X2TRP SpykeTRP SpyreTRP Spyre CTRP Spyre SLC
ALHONGAHJ-LatooHJ-OD04HJ-OD05HJ-MD11
USAGE TIPS
To get the most braking power out of your new sintered pads, it is important to follow these steps to break them in properly.
Brake for 5 seconds while riding at a speed of about 7 mph. Repeat this process 3 more times.
Brake from about 20 mph with medium power and release before coming to a complete stop. Repeat this process 40 times. You should feel the brake performance increase. Let the pads cool between each stop.
Done - Ready for action!
MILES RACING - WE SLOW DOWN YOUR JOURNEY
OVERVIEW
CONSISTENT BRAKING: Enjoy ultimate braking stability while conquering aggressive trails. You can always rely on a consistent feeling of safe and comfortable braking, irrespective of whether you are biking on wet, muddy trails or dry, desert sands. This unparalleled consistency sets sintered pads a level above semi-metallic counterparts where braking performance can vary significantly from brand to brand.
HIGH-TEMPERATURE RESISTANCE: Extremely rugged, sintered construction prevents high-temperature build-up from constant slamming of brakes. This ensures resistance to temperatures as high as 850° - 900°, a far cry from semi-metallic counterparts.
RACE APPROVED: Sintered brake pads are specifically built to withstand the grind of continuous braking in race tracks. Heavy-duty braking power is perfect for extreme racing or downhill racing.
LONG LASTING: Miles Racing premium pads offer unfailing braking power that adventure riders can count on. The iron and copper fortified pads have the highest metallic content among peers. This unique hard compound construction significantly slows down the wear and makes the pads last longer even under extreme riding conditions.
RELIABILITY & COMPATIBILITY: Experience highly reliable, fade-free braking performance on road bikes, touring bicycles, e-bikes, e-MTB cycles, and mountain bikes. Non-asbestos construction further ensures biking safety. Made in Germany and tested by independent testing companies. Check the list of compatible brake systems for a complete list of compatible brakes.
COMPATIBLE BRAKESThis brake pad is compatible with following systems. If you are looking for a different model, please refer to our compatibility chart for all models.
AVIDAvid XO TrailAvid Elixir 7 TrailAvid Elixir 9 Trail
SRAMSRAM Guide RSCSRAM Guide RSSRAM Guide RSRAM Guide TSRAM G2SRAM G2 UltimateSRAM G2 RSC
USAGE TIPS
To get the most braking power out of your new sintered pads, it is important to follow these steps to break them in properly.
Brake for 5 seconds while riding at a speed of about 7 mph. Repeat this process 3 more times.
Brake from about 20 mph with medium power and release before coming to a complete stop. Repeat this process 40 times. You should feel the brake performance increase. Let the pads cool between each stop.
Done - Ready for action!
MILES RACING - WE SLOW DOWN YOUR JOURNEY
OVERVIEW
CONSISTENT BRAKING: Enjoy ultimate braking stability while conquering aggressive trails. You can always rely on a consistent feeling of safe and comfortable braking, irrespective of whether you are biking on wet, muddy trails or dry, desert sands. This unparalleled consistency sets sintered pads a level above semi-metallic counterparts where braking performance can vary significantly from brand to brand.
HIGH-TEMPERATURE RESISTANCE: Extremely rugged, sintered construction prevents high-temperature build-up from constant slamming of brakes. This ensures resistance to temperatures as high as 850° - 900°, a far cry from semi-metallic counterparts.
RACE APPROVED: Sintered brake pads are specifically built to withstand the grind of continuous braking in race tracks. Heavy-duty braking power is perfect for extreme racing or downhill racing.
LONG LASTING: Miles Racing premium pads offer unfailing braking power that adventure riders can count on. The iron and copper fortified pads have the highest metallic content among peers. This unique hard compound construction significantly slows down the wear and makes the pads last longer even under extreme riding conditions.
RELIABILITY & COMPATIBILITY: Experience highly reliable, fade-free braking performance on road bikes, touring bicycles, e-bikes, e-MTB cycles, and mountain bikes. Non-asbestos construction further ensures biking safety. Made in Germany and tested by independent testing companies. Check the list of compatible brake systems for a complete list of compatible brakes.
COMPATIBLE BRAKESThis brake pad is compatible with following systems. If you are looking for a different model, please refer to our compatibility chart for all models.
SHIMANOShimano new Saint from 2009 BR-M810Zee BR-M640BR-MT520Deore BR-MT420Deore BR-MT6120Saint BR-M810Saint BR-M820SLX BR-M7120XT BR-M8020XT BR-M8120XTR BR-M9120
TEKTROAuriga Twin + HD-E745Dorado 4P | HD-E720Dorado 4P | HD-E725Orion 4Px2P (front) | HD-M735Orion | HD-M745Orion | HD-M750
TRPQuadiemQuadiem SLSlate T4
USAGE TIPS
To get the most braking power out of your new sintered pads, it is important to follow these steps to break them in properly.
Brake for 5 seconds while riding at a speed of about 7 mph. Repeat this process 3 more times.
Brake from about 20 mph with medium power and release before coming to a complete stop. Repeat this process 40 times. You should feel the brake performance increase. Let the pads cool between each stop.
Done - Ready for action!
